 |
 1/2" Pex Ring CrimperA PEX ring crimper for 1/2". Crimps conform to ASTM specifications and is supplied with a go/no-go gage. Complete with a soft, comfortable grip OAL 12" - 3lbs
|
|
|
 3/4" Pex Ring CrimperA PEX ring crimper for 3/4". Crimps conform to ASTM specifications and is supplied with a go/no-go gage. Complete with a soft, comfortable grip OAL 12" - 3lbs
|
|
|
 1" Pex Ring CrimperA PEX ring crimper for 1". Crimps conform to ASTM specifications and is supplied with a go/no-go gage. Complete with a soft, comfortable grip OAL 12" - 3lbs
|
|
|
 3/4" and 1/2" Pex Combo CrimperA combination PEX ring crimper fo 3/4" and 1/2". Crimps conform to ASTM specifications and is supplied with a go/no-go gage. Complete with a soft, comfortable grip OAL 16" - 3lbs
|
|
|
 Stainless Clamp Pincher Ratchet ToolThe PEX Stainless Clamp Pincher Ratchet Tool with a full cycle mechanism assures consistent water tight crimps, eliminating the need for a crimp gauge. Made from heat treated steel for strength and durability, its compact design and lightweight frame allow this tool to be extremely versatile when used in confined areas. This PEX Stainless Clamp Pincher Ratchet tool can be used for 3/8", 1/2" 3/4" and 1" crimps. Crimps conform to ASTM F2098 specifications. OAL 11".
|
|
|
 Pex Ring Removers1/2" to 1" Ring Remover. This unique tool is designed for fitting recovery without damaging the fittings. The high mechanical advantage makes shearing of tings much easier and faster than sawing off the crimping ring. Just two cuts on the ring allow the user to reclaim the fitting. Saves time and money!
|
|
|
 Close Quarter Crimp ToolsA unique tool designed for 1/2" and 3/4" pipe sizes. These tools provide a toggle action which helps to assure a complete crimp cycle. Light weight with a comfort fit handle, its high mechanical action allows one hand crimping to ASTM specifications. OAL 12"
|
|
|
 Clamp CrimperThe close quarters crimps rights to ASTM F-1087 on 3/8", 1/2", 3/4" and 1" pipe. A wrench is used to torque the bolts down until the gap is eliminated. Convenient 1" and 3/4" on one side, flip over and 1/2" and 3/8 on the reverse. Complete with a gage to assure crimps are to specification. OAL 3 1/2"
|
|
|
 Clamp Removal ToolThis unique tool allows fitting recovery with an effortless torquing action. Apply the socket to a "T" bar or socket wrench and place over the pinched clamp. By turning 90 degrees in a clockwise action and then counter-clockwise the clamp is sherared making fitting recovery quick and easy. Remove all clamps 3/8", 1/2" 5/8", 3/4" and 1" with one too! Wrench nut included
|
|
|
 Crimp KitA 1" Crimp Tool with interchangeable die inserts. Kit comes with 1/2", 3/4" and 1" inserts in a convenient carrying case with a crimp gage. Optional 3/8" and 5/8" inserts are available. Die inserts are easily changed without tools. No Calibration procedure is required and all crimps conforms to ASTM F-1807 specifications, Kit includes the 89210 Ring Remover..
|
|
|
Crimp Kit Die SetsCrimp Die Sets for the 89220 Crimp Tool Kit.
|
|